Light Pole Request - Hyperia Light Poles

For instant Cut Sheet download, select the options from the dropdowns below (standard options only), fill in your email address (required to trigger the download) and click submit. The following page will then provide the download link.

Provide a Fiber-Reinforced Composite (FRC) Light Pole Model # D1040 as manufactured by PLP Composites, Fitzwilliam, NH 03447. The light pole shall be constructed of polyester resin and fiberglass woven roving with more than 75% of the reinforcing fiberglass in the vertical plane. The pole shall be engineered and manufactured to have an EPA rating of [email protected] 100 MPH with a gust factor of 1.3.

The pole shall be a direct burial style with a mounting height of 40’, and an overall length of 45’ allowing for 5’ to be below grade. The tip diameter will be 5.3” and the base diameter 8.5”. An anti-rotational device shall be located above the butt of the pole, consisting of a tube extending out from each side of the pole. The pole shall be equipped with a 1 3/8” nylon grommeted hole two feet below grade.

SELECT MOUNT TYPE:

Top Mount Type
Side Mount Type

Top Mount Type

The pole shall be a top mount with a tenon.

Side Mount Type

The pole shall be reinforced with an aluminum sleeve to support bolting. The manufacturer be required to drill according to luminaire manufacturer’s provided template. The pole shall be equipped with a nonconductive pole cap.

It shall be round with a classical entasis taper, with an acrylic alkyd enamel coating with a satin brushed finish. The color shall be .

The pole shall have a handhole with a non-conductive door, including vandal resistant screws.

For a quote request, then fill out the additional fields, attach any appropriate documentation and click submit. We will respond with a quote as quickly as possible.

Show form

Additional comments or modifications:

Please attach cuts of the fixture and appropriate file information. (Max size 50mb per file)

No file uploaded.

There was a problem with your submission. Errors have been highlighted above.