Light Pole Request - Hyperia Light Poles

For instant Cut Sheet download, select the options from the dropdowns below (standard options only), fill in your email address (required to trigger the download) and click submit. The following page will then provide the download link.

Provide a Fiber-Reinforced Composite (FRC) Light Pole Model # D213 as manufactured by PLP Composites, Fitzwilliam, NH 03447. The light pole shall be constructed of polyester resin and fiberglass woven with more than 75% of the reinforcing fiberglass in the vertical plane. The pole shall be engineered and manufactured to have an EPA rating of 2@ 100 MPH with a gust factor of 1.3.

The pole shall be direct burial style with a mounting height of 13 ’, and an overall length of 16’ allowing for 3’ to be below grade. The tip diameter will be 3.3” and the base diameter 5.25”. An anti-rotational device shall be located above the butt of the pole, consisting of a tube extending out from each side of the pole. The pole shall be equipped with a 1 3/8” nylon grommeted hole below grade.

The top of the pole shall have a aluminum tenon.

It shall be round with a classical entasis taper, with an acrylic alkyd enamel coating with a satin brushed finish. The color shall be .

The pole shall have a handhole with a non-conductive door, including vandal resistant screws.

Note: This pole shall be for direct top mount luminaires only.

For a quote request, then fill out the additional fields, attach any appropriate documentation and click submit. We will respond with a quote as quickly as possible.

Show form

Additional comments or modifications:

Please attach cuts of the fixture and appropriate file information. (Max size 50mb per file)

No file uploaded.

There was a problem with your submission. Errors have been highlighted above.