Troy Series

For instant Cut Sheet download, select the options from the dropdowns below (standard options only), fill in your email address (required to trigger the download) and click submit. The following page will then provide the download link.

Provide a Fiber-Reinforced Composite (FRC) One-Piece Troy Trim Decorative Light Pole with an integrated decorative base manufactured by PLP Composites, Fitzwilliam, NH 03447. The pole and base shall be constructed of polyester resin and fiberglass woven roving with more than 75% of the reinforcing fiberglass in the vertical plane. The pole shall be engineered and manufactured to have an EPA rating of 3@ mph with a gust factor of 1.3.

The pole shall be a straight fluted direct bury style with a mounting height of allowing for 3’ to be below grade. The tip diameter will be 4” and the integrated base diameter of 8”. An anti-rotational device shall be located above the butt of the pole, consisting of a tube extending out from each side of the pole. The pole shall be equipped with a 1 3/8” nylon grommeted hole two feet below grade.

TOP MOUNT TYPE
The pole shall be a top mount with a tenon.

It shall be straight round fluted with an acrylic alkyd enamel coating with a finish.

The color shall be

The pole shall have a 2 ½”x5” handhole with a non-conductive door, including vandal resistant screws.

For a quote request, then fill out the additional fields, attach any appropriate documentation and click submit. We will respond with a quote as quickly as possible.

Show form

Additional comments or modifications:

Please attach cuts of the fixture and appropriate file information. (Max size 50mb per file)

No file uploaded.

There was a problem with your submission. Errors have been highlighted above.

Follow Us!